Drying a structure correctly isn't about running a few fans and hoping — it's a calculated process based on temperature, humidity, and airflow readings.
We calculate air mover and dehumidifier placement using psychrometric formulas, not a flat per-room equipment count.
We calculate drying requirements using temperature and humidity data, not a flat per-room rule.
Low Grain Refrigerant dehumidifiers pull significantly more moisture from the air than consumer-grade units.
Thermal scans on every Severance, CO job catch moisture a visual inspection alone would miss.
Daily logs give you and your insurer verifiable proof of progress, not a technician's word.
Here's the full scope of a Structural Drying And Dehumidification job in Severance, from initial scan to final verification.
The assessment sets the baseline every later reading gets measured against.
Thermal cameras scan walls, ceilings, and flooring to reveal moisture invisible to the naked eye.
Dehumidifier capacity is matched to the calculated moisture load for that specific space.
A technician returns daily to take moisture readings and log progress against the drying plan.
We adjust drying speed for sensitive materials like hardwood and cabinetry to prevent secondary damage.
Final verification compares closing readings against the material-specific dry standard, not a general guess.
We ask enough to bring the right instruments on the first visit.
Our nearest Severance, CO crew brings diagnostic equipment loaded from the start.
You'll see the calculated plan and cost before drying equipment goes down.
We verify final moisture readings against dry standard before removing equipment.
"The thermal imaging found moisture behind a wall that looked completely fine from the outside. Would have missed it otherwise." — Julian R.
"They came back every single day to take readings and showed me the numbers improving. Felt like real science, not guesswork." — Monique T.
"Our hardwood floor didn't warp because they slowed the drying process down specifically for it." — Grant P.
Visual appearance doesn't confirm dryness — instrument readings are needed to catch what's not visible.
It's the technical foundation behind Structural Drying And Dehumidification rather than a marketing term.
Typical drying time is 3-5 days for standard materials, longer for sensitive ones like hardwood.
Daily documentation is standard, giving you real data rather than just an assurance.
We adjust the drying plan whenever sensitive materials are involved.
A stall in the daily logs triggers a plan review rather than simply leaving equipment running unchanged.
If your property is in or near Severance, a crew can typically respond the same day.
Speak directly with our structural drying team.
Call +1-844-833-1325